12V Addressable LED Strip
LEDSuntech offers high performance 12V addressable LED strips. Three main types of 12V addressable LED strips:
SPI External IC: Includes WS2811 LED Strip, GS8208 LED Strip, WS2818 LED Strip, and UCS1903 LED Strip, etc. These strips use an external SPI (Serial Peripheral Interface) controller. Allows for scalable and customizable configurations. Suitable for complex large installation lighting projects.
SPI Internal IC: Includes WS2815 LED Strip and SK6812 LED Strip, etc. These strips have an integrated SPI controller. This simplifies installation and reduces the need for additional hardware. While still providing high-speed data transmission and precise control. It is suitable for large installation projects with precise color control.
DMX LED Strip: DMX LED Strip is more suitable for professional lighting. Uses DMX512 protocol to achieve synchronized lighting effects. Widely used in stage performances, architectural lighting, and large display lighting.
The main difference between these types is their control mechanism. SPI external IC strips offer greater flexibility and are better suited for larger projects; SPI internal IC strips offer easy-to-use integrated controls that simplify installation; and DMX LED strips are designed to meet professional and synchronized lighting needs.
12V programmable LED strips have some advantages over 5V and 24V addressable LED strips. 12V addressable LED strips strike a balance between voltage drop and power efficiency. 12V pixel LED strips allow for longer run times without significantly reducing brightness or color consistency.
Common 12V addressable LED strip applications include commercial signage, architectural lighting, automotive lighting, outdoor displays, and large decorative installations.
Category
SPI External IC
WS2811 LED Strip
WS2811 DC12V 30 LEDs/m 10mm White LED Strip
Color: White
LED Qty: 30
Voltage: DC12V
Cutting Unit: 100 mm
Power: 7.2 W/m
Pixel Qty: 10 Pixels
Break Continue: No
PCB Width: 10mm
The WS2811 DC12V strip delivers clean white lighting with 30 LEDs and 10 pixels per meter on a 10mm PCB. Its 100mm cutting pitch offers installation flexibility, and the 7.2W/m power consumption makes it suitable for energy‑sensitive projects. This model does not feature break‑point resume, so signal interruption may affect downstream pixels.
WS2811 DC12V 30 LEDs/m 10mm RGB LED Strip
Color: RGB
LED Qty: 30
Voltage: DC12V
Cutting Unit: 100 mm
Power: 7.2 W/m
Pixel Qty: 10 Pixels
Break Continue: No
PCB Width: 10mm
Powered by WS2811 IC and DC12V, this 10mm RGB strip offers 30 LEDs per meter with 10 individually controllable pixels for dynamic color sequencing. The 100mm cutting pitch allows easy length customization, while the low 7.2W/m power draw ensures energy‑efficient operation. Note that this model does not include break‑point resume functionality.
WS2811 DC12V 60 LEDs/m 10mm White LED Strip
Color: White
LED Qty: 60
Voltage: DC12V
Cutting Unit: 50 mm
Power: 14.4 W/m
Pixel Qty: 20 Pixels
Break Continue: No
PCB Width: 10mm
For white addressable LED strip normally the PCB is white color, we can supply black PCB as well. Quite popular in night club lighting with dynamic lighting visual impact. WS2811 has good market share since compatible with various controllers overseas such as Arduino. The LED strip can be IP20, IP65 and IP67, suitable for both indoor and outdoor application.
WS2811 DC12V 60 LEDs/m 10mm White LED Strip
Color: White
LED Qty: 60
Voltage: DC12V
Cutting Unit: 50 mm
Power: 14.4 W/m
Pixel Qty: 20 Pixels
Break Continue: No
PCB Width: 10mm
WS2811 is a popular integrated circuit (IC) used for controlling addressable LED strips, which allows for the creation of visually stunning and dynamic lighting effects with pure white color. Same as the WS2811 RGB, it’s an externally installed IC to control every 3 or 6 LEDs. In addition to controlling RGB LEDs, the WS2811 IC can also be used to control white LED lights.
WS2811 DC12V 30 LEDs/m 10mm CCT LED Strip
Color: CCT
LED Qty: 30
Voltage: DC12V
Cutting Unit: 100 mm
Power: 7.2 W/m
Pixel Qty: 10 Pixels
Break Continue: No
PCB Width: 10mm
This WS2811 CCT LED strip operates at a voltage of 12V, and one meter has 30 LEDs on 10mm PCB board, with a density of 10 ICs per meter, each IC controls 3 LEDs. This WS2811 LED strip is with 3 in 1 white LED chips, make it CCT addressable. This one is cost effective CCT addressable LED strip with less pixels and less LEDs per meter. If the budget is limited, this is a good option.
WS2811 DC12V 60 LEDs/m 10mm CCT LED Strip
Color: CCT
LED Qty: 60
Voltage: DC12V
Cutting Unit: 50 mm
Power: 14.4 W/m
Pixel Qty: 20 Pixels
Break Continue: No
PCB Width: 10mm
This WS2811 CCT LED strip is with 3 in 1 white LED chips, make it offers the versatility of CCT (Correlated Color Temperature) control. There are 60 addressable WWA LEDs per meter, and 10mm wide PCB for 60LEDs/meter, DC12V input, controlled by external IC WS2811, with a density of 20 ICs per meter, each IC controls 3 LEDs.
WS2811 DC12V 30 LEDs/m 10mm RGB LED Strip
Color: RGB
LED Qty: 30
Voltage: DC12V
Cutting Unit: 100 mm
Power: 7.2 W/m
Pixel Qty: 10 Pixels
Break Continue: No
PCB Width: 10mm
This LED strip is similar to WS2811 DC12V 30 LEDs/m 10mm CCT LED Strip and is also a more cost effective choice, as it has 30 RGB LEDs per meter. WS2811 DC12V 30 LEDs/m 10mm RGB LED Strip operates at a voltage of 12V, with a density of 10 ICs per meter, each IC controls 3 LEDs, and the PCB width of this LED strip is 10mm.
WS2811 DC12V 60 LEDs/m 10mm RGB LED Strip
Color: RGB
LED Qty: 60
Voltage: DC12V
Cutting Unit: 50 mm
Power: 14.4 W/m
Pixel Qty: 20 Pixels
Break Continue: No
PCB Width: 10mm
WS2811 addressable RGB LED strips are popular for use in a variety of lighting applications, including home lighting, stage lighting, and decorative lighting. WS2811 LED strips can be cut to size and reconnected, making them easy to install and customize.
WS2811 DC12V 60 LEDs/m 10mm UV LED Strip
Color: UV 365nm/395nm
LED Qty: 60
Voltage: DC12V
Cutting Unit: 50 mm
Power: 14.4 W/m
Pixel Qty: 20 Pixels
Break Continue: No
PCB Width: 10 mm
This WS2811 RGB LED strip operates at a voltage of 12V, 60 RGB LEDs (20 WS2811 pixels) per meter on a 10mm width PCB, 3 LEDs can be cut. The cut length is accurate, and you can easily get the strip length you want to install. This WS2811 lights addressable led strip can display a variety of dynamic light effects through the WS2811 controller (SPI controller).
GS8208 LED Strip
GS8208 DC12V 60 LEDs/m 10mm CCT LED Strip
Color: CCT
LED Qty: 60
Voltage: DC12V
Cutting Unit: 16.6 mm
Power: 14.4 W/m
Pixel Qty: 60 Pixels
Break Continue: Yes
PCB Width: 10 mm
This LED strip use GS8208 external IC, it has a break-continue function. If one LED is damaged, it will not affect the other LEDs working. This IC can control LED individually addressable, each LED can be addressed and show any color you want. And each LED is a 3in1 CCT LED with 3 color temperatures, soft white 3000K light, 4000k natural white and 6000K pure white light in one SMD LED.
GS8208 DC12V 50 LEDs/m 12mm RGB LED Strip
Color: RGB
LED Qty: 50
Voltage: DC12V
Cutting Unit: 20 mm
Power: 12 W/m
Pixel Qty: 50 Pixels
Break Continue: Yes
PCB Width: 12mm
We offer this individually addressable RGB LED strip that controlled by external IC WS2811. This GS8208 RGB LED strip operates at a voltage of 12V, and one meter has 50 LEDs on 12mm PCB board, with a density of 50 ICs per meter, and you can control each LED individually. This LED strip has break-continue functionality, if one LED lose work, others still work.
GS8208 DC12V 60 LEDs/m 10mm RGB LED Strip
Color: RGB
LED Qty: 60
Voltage: DC12V
Cutting Unit: 16.6 mm
Power: 10 W/m
Pixel Qty: 60 Pixels
Break Continue: Yes
PCB Width: 10mm
Need both vibrant RGB effects and dependable performance? This S8208 strip runs on DC12V and packs 60 LEDs per meter into a 10mm‑wide PCB, with each LED acting as its own pixel. Break‑point resume adds a layer of security—signal passes through even if one LED goes down.
WS2818 LED Strip
WS2818 DC12V 60 LEDs/m 8mm White LED Strip
Color: White
LED Qty: 60
Voltage: DC12V
Cutting Unit: 50 mm
Power: 14.4 W/m
Pixel Qty: 20 Pixels
Break Continue: Yes
PCB Width: 8 mm
A 12V 5m long white LED pixel strip with dual data signal (4 pin wires,12V+, DI, DO, GND), 60 SMD5050 LEDs per meter. WS2818 can be regarded as the upgraded version of single signal WS2811 and SM16703, similar to FW1935 . If one of the LEDs on the 5 meters strip is damaged, the spare signal wire will continue to work properly, adding security to your addressable lighting project.
WS2818 DC12V 60 LEDs/m 10mm White LED Strip
Color: White
LED Qty: 60
Voltage: DC12V
Cutting Unit: 50 mm
Power: 14.4 W/m
Pixel Qty: 20 Pixels
Break Continue: Yes
PCB Width: 10 mm
White addressable LED strip with WS2818 IC, there are 60 LEDs per meter, and 10mm wide PCB width, DC 12V input, and every 3 LEDs can be cut! WS2818 can be regarded as the upgraded version of single signal WS2811 and SM16703, similar to FW1935. If one of the LEDs on the strip is damaged, the spare signal wire will continue to work properly, adding security to your addressable lighting project.
WS2818 DC12V 72 LEDs/m 8mm White LED Strip
Color: White
LED Qty: 72
Voltage: DC12V
Cutting Unit: 41.6 mm
Power: 17.2 W/m
Pixel Qty: 24 Pixels
Break Continue: Yes
PCB Width: 8 mm
A new DC12V addressable WS2818 addressable white led strip type. There are 72LEDs per meter on 8mm wide PCB. Compared to traditional 60 LEDs/m 10mm width white pixel strips, this product features higher LED density and a slimmer design. Can be fitted into narrower aluminum profiles. One WS2818 IC controls 3 LEDs, one IC control area per 42mm. 24 pixels per meter.
WS2818 DC12V 60 LEDs/m 10mm CCT LED Strip
Color: CCT
LED Qty: 60
Voltage: DC12V
Cutting Unit: 50 mm
Power: 14.4 W/m
Pixel Qty: 20 Pixels
Break Continue: Yes
PCB Width: 10 mm
A special DC12V addressable WS2818 CCT led strip with 60LEDs/m, each LED has 3 colors namely 3 in 1 white LED chip combines warm white 2700k, natural white 4000k and cool white 6500k. The DC12V LED strip light is a single IC control 3LEDs, 3LEDs cuttable. Dual signal line version and signal breakpoint continuous transmission. If a LED damage, the work of other LEDs will not be affected.
WS2818 DC12V 72 LEDs/m 8mm CCT LED Strip
Color: CCT
LED Qty: 72
Voltage: DC12V
Cutting Unit: 83.33 mm
Power: 17.2 W/m
Pixel Qty: 24 Pixels
Break Continue: Yes
PCB Width: 8 mm
It operates at DC12V and contains 72 LEDs per meter. This strip delivers smooth, uniform white light with adjustable color temperature from warm white to cool white. The narrow 8mm PCB width makes it suitable for installations where space is limited, such as slim channels, tight coves, and compact architectural details.
WS2818 DC12V 72 LEDs/m 10mm CCT LED Strip
Color: CCT
LED Qty: 72
Voltage: DC12V
Cutting Unit: 41.6 mm
Power: 17.2 W/m
Pixel Qty: 12 Pixels
Break Continue: Yes
PCB Width: 10 mm
Special new 3 in 1 white addressable LED strip with WS2818 IC. There are three color temperatures on each LED, 2700K-3200K warm white, 4000K-4500K neutral white, and 6000K-6500K daylight or cool white. This LED strip has break-continue functionality, if one LED lose work, others still work. 72 LEDs per meter, 3 LEDs form one pixel, making 24 pixels total.
WS2818 DC12V 60 LEDs/m 8mm RGB LED Strip
Color: RGB
LED Qty: 60
Voltage: DC12V
Cutting Unit: 50 mm
Power: 14.4 W/m
Pixel Qty: 20 Pixels
Break Continue: Yes
PCB Width: 8mm
WS2818 arduino LED strip is a popular addressable LED strip that can be controlled by an Arduino microcontroller board. With the help of Arduino programming, you can create various lighting effects on the WS2818 LED strip, such as rainbow, color wipe, sparkle, fade, and pulse.
WS2818 DC12V 60 LEDs/m 10mm RGB LED Strip
Color: RGB
LED Qty: 60
Voltage: DC12V
Cutting Unit: 50 mm
Power: 14.4 W/m
Pixel Qty: 20 Pixels
Break Continue: Yes
PCB Width: 10mm
There are 60 addressable RGB LEDs per meter, and 10mm wide for 60LEDs/meter, DC5V input, and a single WS2818 IC controls 3LEDs, 3LEDs cuttable, 20 pixels per meter in total. This LED strip has break-continue functionality, if one of the LEDs on the strip is damaged, the spare signal wire will continue to work properly, adding security to your addressable lighting project.
WS2818 DC12V 72 LEDs/m 8mm RGB LED Strip
Color: RGB
LED Qty: 72
Voltage: DC12V
Cutting Unit: 41.6 mm
Power: 17.2W/m
Pixel Qty: 24 Pixels
Break Continue: Yes
PCB Width: 8mm
72leds/m RGB addressable LED strip with backup function better than WS2811 which has only one signal cable; this strip has dual signal to make it better signal transmission. The 8mm width ensures versatility with various aluminum profiles in the market easy to DIY.
WS2818 DC12V 60 LEDs/m 10mm UV LED Strip
Color: UV
LED Qty: 60
Voltage: DC12V
Cutting Unit: 50 mm
Power: 14.4 W/m
Pixel Qty: 20 Pixels
Break Continue: Yes
PCB Width: 10mm
395nm belongs to the range of UVA ultraviolet rays. UVA ultraviolet rays are often called “black light”. We offer 395nm UV LEDs. This product’s working voltage is 12V. Each of the three LEDs is driven by an external WS2818 IC. Control is via the serial data protocol SPI.The WS2818 uses two data lines for signal transmission, with breakpoint and resume functionality. LEDs can be programmed to achieve dynamic patterns, colors, or intensity.
UCS1903 LED Strip
UCS1903 DC12V 30 LEDs/m 10mm White LED Strip
Color: White
LED Qty: 30
Voltage: DC12V
Cutting Unit: 100 mm
Power: 7.2 W/m
Pixel Qty: 10 Pixels
Break Continue: No
PCB Width: 10 mm
The UCS1903 IC is similar to WS811 IC in function, but the former is more stable in performance. 10mm PCB width, 30 white LEDs per meter, and one UCS1903 IC controls three LEDs, each 100mm (three LEDs) can be cut. We have redesigned the UCS1903 LED strip with a new 3oz PCB board design that extends its single-sided power input working distance from 5m to 10m.
UCS1903 DC12V 30 LEDs/m 10mm CCT LED Strip
Color: CCT
LED Qty: 30
Voltage: DC12V
Cutting Unit: 100 mm
Power: 7.2 W/m
Pixel Qty: 10 Pixels
Break Continue: No
PCB Width: 10 mm
There are 30 addressable CCT LEDs per meter, and 10mm wide for 30LEDs/meter, DC5V input, and a single WS2818 IC controls 3LEDs, 3LEDs cuttable, 10 pixels per meter in total. Each LED is a 3in1 CCT LED with 3 color temperatures. Unlike common UCS1903 12v LED strip in market, our new design use 3oz PCB can support up to 10 meters longer distance.
UCS1903 DC12V 30 LEDs/m 10mm RGB LED Strip
Color: RGB
LED Qty: 30
Voltage: DC12V
Cutting Unit: 100 mm
Power: 7.2 W/m
Pixel Qty: 10 Pixels
Break Continue: No
PCB Width: 10mm
This dream color UCS1903 RGB LED strip has a density of 30 LEDs per meter, the external UCS1903 IC are mounted on the PCB, with 10 ICs per meter. One UCS1903 IC controls three SMD5050 LEDs. Dual signal line version and signal breakpoint continuous transmission. If a LED damage, the work of other LEDs will not be affected.
UCS1903 DC12V 30 LEDs/m 10mm CCT LED Strip
Color: CCT
LED Qty: 30
Voltage: DC12V
Cutting Unit: 100 mm
Power: 7.2 W/m
Pixel Qty: 10 Pixels
Break Continue: No
PCB Width: 10mm
This CCT LED strip runs on DC12V with 30 LEDs per meter, delivering tunable white light from warm to cool. It features a 10mm width, 100mm cutting intervals, and 10 pixels per meter. With low power consumption of just 7.2 W/m, it offers an energy-efficient lighting solution. Note: break-continue is not supported.
UCS1903 DC12V 30 LEDs/m 10mm White LED Strip
Color: W
LED Qty: 30
Voltage: DC12V
Cutting Unit: 100 mm
Power: 7.2 W/m
Pixel Qty: 10 Pixels
Break Continue: No
PCB Width: 10mm
This strip provides bright and reliable illumination, and it uses only 7.2 W/m, so it saves energy without sacrificing performance. The slim 10mm profile and 100mm cutting intervals make installation quick and easy. With 10 pixels per meter, you can also create basic dynamic effects.
UCS1903 DC12V 60 LEDs/m 10mm RGB LED Strip
Color: RGB
LED Qty: 60
Voltage: DC12V
Cutting Unit: 50 mm
Power: 14.4 W/m
Pixel Qty: 20 Pixels
Break Continue: No
PCB Width: 10mm
This strip delivers bright and uniform illumination across the entire RGB spectrum. It has a power consumption of 14.4 W/m, which provides high brightness output for vivid color presentations. The 10mm PCB width and a 50mm cutting unit allow precise customization for various installation scenarios. With 20 pixels per meter, the strip supports smooth color transitions and complex dynamic lighting sequences.
WS2813 LED Strip
WS2813 DC12V 96 LEDs/m 10mm RGB LED Strip
Color: RGB
LED Qty: 96
Voltage: DC12V
Cutting Unit: 16.6 mm
Power: 17 W/m
Pixel Qty: 96 Pixels
Break Continue: Yes
PCB Width: 10 mm
This WS2813 RGB strip operates at DC12V with 96 LEDs/m on a 10mm PCB. Every LED is individually addressable (96 pixels/m), supports break‑point resume, and is cuttable every 16.6mm. Power consumption is 17W/m.
UCS7604 LED Strip
UCS7604 DC12V 60 LEDs/m 10mm RGBW LED Strip
Color: RGBW
LED Qty: 60
Voltage: DC12V
Cutting Unit: 50 mm
Power: 19.2 W/m
Pixel Qty: 20 Pixels
Break Continue: Yes
PCB Width: 10mm
The system supports the full RGBW 4-in-1 colour output. In addition to the vibrant dynamic colour chasing effects it has a special white channel for purer and brighter white lighting. The strip operates on a stable DC 12V input and reduces voltage drop over long runs. It uses less current and requires fewer power injection points than regular 5V options.
FW1935 LED Strip
FW1935 DC12V 60 LEDs/m 10mm RGB LED Strip
Color: RGB
LED Qty: 60
Voltage: DC12V
Cutting Unit: 50 mm
Power: 14.4 W/m
Pixel Qty: 20 Pixels
Break Continue: Yes
PCB Width: 10mm
Using high-quality RGB three-in-one lamp beads, no color difference, high brightness, good light mixing, users can achieve a more perfect visual effect during the operation. Through the single-line zero code protocol, RGB three-channel mode, programming and design of the fantasy mode, the meteor, chase, water droplets, horse racing and other effects are better.
SM16703 LED Strip
SM16703 DC12V 30 LEDs/m 10mm RGB LED Strip
Color: RGB
LED Qty: 30
Voltage: DC12V
Cutting Unit: 100 mm
Power: 7.2 W/m
Pixel Qty: 10 Pixels
Break Continue: No
PCB Width: 10mm
10mm PCB width 5050SMD 60LEDs/m High Density 12V/24V External SM16703 Digital RGB LED Strip. Every three lights of a segment are controlled by an external SM16703 IC chip at 12V cut each 50mm, Every six lights of a segment are controlled by an external SM16703 IC chip at 24V cut each 100mm, allowing the LEDs on different segments to be different colors.
SM16703 DC12V 30 LEDs/m 10mm White LED Strip
Color: W
LED Qty: 30
Voltage: DC12V
Cutting Unit: 100 mm
Power: 7.2 W/m
Pixel Qty: 10 Pixels
Break Continue: No
PCB Width: 10mm
This strip provides bright and uniform illumination, and it uses only 7.2 W/m, so it saves energy without compromising performance. The slim 10mm profile and 100mm cutting intervals make installation quick and easy. With 10 pixels per meter, you can also create basic dynamic effects.
SM16703 DC12V 30 LEDs/m 10mm CCT LED Strip
Color: CCT
LED Qty: 30
Voltage: DC12V
Cutting Unit: 100 mm
Power: 7.2 W/m
Pixel Qty: 10 Pixels
Break Continue: No
PCB Width: 10mm
It has a low power consumption of 7.2 W/m, which makes it an energy-efficient choice for extended operation. The 10mm PCB width and a 100mm cutting unit allow flexible customization for a variety of installation requirements. With 10 pixels per meter, the strip supports smooth dimming and color temperature control.
SM16703 DC12V 30 LEDs/m 10mm RGB LED Strip
Color: RGB
LED Qty: 30
Voltage: DC12V
Cutting Unit: 100 mm
Power: 7.2 W/m
Pixel Qty: 10 Pixels
Break Continue: No
PCB Width: 10mm
The 10mm width fits into tight profiles and channels, while the 100mm cutting intervals give installers the freedom to match exact lengths. The 10-pixel-per-meter configuration enables color changes and simple animation effects that can transform a static environment into an engaging visual experience.
SM16703 DC12V 60 LEDs/m 10mm RGB LED Strip
Color: RGB
LED Qty: 60
Voltage: DC12V
Cutting Unit: 50 mm
Power: 14.4 W/m
Pixel Qty: 20 Pixels
Break Continue: No
PCB Width: 10mm
The 10mm PCB width and a 50mm cutting unit offer precise length adjustment for customized installations. This model does not include break-continue functionality, so proper soldering and connection practices are necessary to prevent circuit interruptions. Common use cases include commercial signage, architectural outline lighting, stage backdrop effects, and high-end retail displays where color precision and brightness are critical.
TM1804 LED Strip
TM1804 DC12V 180 LEDs/m 12mm RGB LED Strip
Color: RGB
LED Qty: 180
Voltage: DC12V
Cutting Unit: 50 mm
Power: 20 W/m
Pixel Qty: 20 Pixels
Break Continue: No
PCB Width: 12mm
This 12V high density TM1804 RGB LED strip has a density of up to 180 LEDs per meter, capable of providing bright, colorful lighting.This full color dynamic LED strip also has a good heat dissipation layout for longer life. External TM1804 IC chips are mounted on the PCB, 20 ICs per meter. One TM1804 IC chip controls 9 RGB LED chips. It can be cut along the cutting line every 50mm.
TM1814 LED Strip
TM1814 DC12V 60 LEDs/m 10mm RGBW LED Strip
Color: RGBW
LED Qty: 60
Voltage: DC12V
Cutting Unit: 50 mm
Power: 19.2 W/m
Pixel Qty: 20 Pixels
Break Continue: No
PCB Width: 10mm
The TM1814 LED strip is a 4-channel 65536-level brightness addressable light strip with TM1814 external IC. It does not have the breakpoint resume function.The LED controlled by TM1814 IC can be used with K-1000C or K-8000C LED controller to achieve hundreds of wonderful lighting effects, such as flashing, chasing, jumping changes, clockwise running, counterclockwise running, monochrome running, flowing water, etc.
TM1934 LED Strip
TM1934 DC12V 60 LEDs/m 10mm RGB LED Strip
Color: RGB
LED Qty: 60
Voltage: DC12V
Cutting Unit: 50 mm
Power: 14.4 W/m
Pixel Qty: 20 Pixels
Break Continue: Yes
PCB Width: 10mm
TM1934 LED strip light is a double-channel data transmission digital LED strip. It has four wires: V+, DI, BI, and GND for power and signal transfer. With externally separate TM1934 ICs and SMD5050 RGB LED chips, the TM1934 digital LED strip has high brightness and stable signal transfer.The most notable feature of the TM1934 LED strip is its pixel break-continue function.
TM1934 DC12V 72 LEDs/m 8mm RGB LED Strip
Color: RGB
LED Qty: 72
Voltage: DC12V
Cutting Unit: 41.6 mm
Power: 17.2 W/m
Pixel Qty: 24 Pixels
Break Continue: Yes
PCB Width: 8 mm
This TM1934 DC12V RGB LED strip features 72 LEDs per meter on an 8mm‑wide PCB, delivering vibrant color effects with 24 addressable pixels per meter for finer control. Break‑point resume ensures reliable operation, while the 41.6mm cutting pitch allows precise length customization. Power consumption is rated at 17.2W per meter.
UCS2903 LED Strip
UCS2903 DC12V 30 LEDs/m 10mm RGB LED Strip
Color: RGB
LED Qty: 30
Voltage: DC12V
Cutting Unit: 100 mm
Power: 7.2W/m
Pixel Qty: 10 Pixels
Break Continue: No
PCB Width: 10 mm
This strip delivers basic RGB color mixing with sufficient brightness for accent and decorative applications. It has a low power consumption of 7.2 W/m, which makes it an economical choice for extended operation and battery-powered projects. The standard 10mm PCB width ensures compatibility with most mounting channels and profiles.
UCS2904 LED Strip
UCS2904 DC12V 60 LEDs/m 10mm RGBW LED Strip
Color: RGBW
LED Qty: 60
Voltage: DC12V
Cutting Unit: 50 mm
Power: 19.2 W/m
Pixel Qty: 20 Pixels
Break Continue: No
PCB Width: 10mm
The UCS2904 RGBW IC is very similar to the SK6812 RGBW IC, but it is more stable and requires only one digital output pin to transmit data. One IC can control three or six lights, and each IC zone can display a different color. Dynamic RGB and white light effects can be displayed. An RGBW addressable LED controller is required to control this light.
UCS2904 DC12V 60 LEDs/m 12mm RGBW LED Strip
Color: RGBW
LED Qty: 60
Voltage: DC12V
Cutting Unit: 50 mm
Power: 19.2 W/m
Pixel Qty: 20 Pixels
Break Continue: No
PCB Width: 12mm
The 12mm width provides better heat dissipation than narrower strips, which helps maintain consistent performance. The 50mm cutting unit makes length adjustments easy, and the 20 pixels per meter allow for smooth color mixing and dynamic effects.
UCS5603 LED Strip
UCS5603 DC12V 60 LEDs/m 10mm White LED Strip
Color: W
LED Qty: 60
Voltage: DC12V
Cutting Unit: 50 mm
Power: 14.4 W/m
Pixel Qty: 20 Pixels
Break Continue: Yes
PCB Width: 10mm
The UC5603 DC12V 60 LEDs/m 10mm White LED Strip from LEDSunTech is a high-density single-color lighting solution that combines bright output with exceptional reliability for professional and residential applications. It operates at DC12V and contains 60 LEDs per meter.
UCS5603 DC12V 60 LEDs/m 8mm RGB LED Strip
Color: RGB
LED Qty: 60
Voltage: DC12V
Cutting Unit: 50 mm
Power: 14.4 W/m
Pixel Qty: 20 Pixels
Break Continue: Yes
PCB Width: 8mm
The UCS5603 IC is a next-generation dual-channel LED driver designed for high-performance lighting and display applications. With an advanced800Kbps data transmission rate, it supports up to 740 pixels at 30fps or 370 pixels at 60fps. Smooth and stable operation at any frame rate.
UCS5603 DC12V 72 LEDs/m 8mm RGB LED Strip
Color: RGB
LED Qty: 72
Voltage: DC12V
Cutting Unit: 41.6 mm
Power: 24 W/m
Pixel Qty: 24 Pixels
Break Continue: Yes
PCB Width: 8mm
With independently adjustable RGB channel currents (16 levels), ±3% current accuracy, and real-time fault detection, the UCS5603 provides both flexibility and precision. Whether for LED strips, large video walls, or creative lighting installations, the UCS5603 delivers stable, high-quality performance you can rely on.
SPI Built-in IC
WS2815 LED Strip
WS2815 DC12V 100leds/75cm 2.6mm 3mm RGB LED Strip
Color:RGB
LED Qty: 100leds/75cm
Voltage: DC12V
Cutting Unit: 7.5 mm
Power: 3 W/PCS
Pixel Qty: 100 Pixels/75cm
Break Continue: Yes
PCB Width: 2.6 mm
Take a look at our new 12V RGBIC automobile interior trim light strip. It’s only 2.6mm/3mm wide and very thin. It employs a two-wire data protocol to send data reliably. If one LED goes out, the whole strip won’t go dark. Using the smallest 1010 SMD LED chips and a built-in WS2815 addressable LED smart IC.
WS2815 DC12V 186leds/75cm 3mm RGB LED Strip
Color: RGB
LED Qty: 186leds/75cm
Voltage: DC12V
Cutting Unit: 4.0 mm
Power: 5.58/PCS W/m
Pixel Qty: 186 Pixels/75cm
Break Continue: Yes
PCB Width: 3 mm
The full-color 12V SPI super thin high-density 3mm 186leds/75cm LED strip for lighting cabinets and shelves is good for the environment and saves energy. The power is just 5.58W per piece. The design of the lamp bead with 186 LEDs and a height of 75 cm makes the light almost perfect.
WS2815 DC12V 60 LEDs/m 5mm White LED Strip
Color: White
LED Qty: 60
Voltage: DC12V
Cutting Unit: 16.67 mm
Power: 8.6 W/m
Pixel Qty: 60 Pixels
Break Continue: Yes
PCB Width: 5mm
This compact, ultra-thin WS2815 LED strip uses a 12V power input and features one individually programmable 3535 LED. The density is 60 LEDs per meter. Each LED houses a WS2815 IC. Represent a single pixel. Therefore, this tiny 12V ultra-thin LED strip has 300 pixels per 5-meter/16-foot roll.The narrow 5mm width makes this WS2815 LED strip great for narrow letter channel lighting and other arc lighting.
WS2815 DC12V 60 LEDs/m 10mm White LED Strip
Color: White
LED Qty: 60
Voltage: DC12V
Cutting Unit: 16.67 mm
Power: 8.6 W/m
Pixel Qty: 60 Pixels
Break Continue: Yes
PCB Width: 10mm
Each IC controls a single LED. This enables precise zone control. The dynamic addressable white LED strip lights have 60 LEDs per meter. This addressable LED strip can be cut into 16.67mm sections, with each section containing only one LED. The precise cutting design and adhesive backing allow it to fit into various irregular shapes and corners. This is a great choice for DIY lighting.
WS2815 DC12V 84 LEDs/m 6mm White S LED Strip
Color: White
LED Qty: 84
Voltage: DC12V
Cutting Unit: 35.7 mm
Power: 12 W/m
Pixel Qty: 84 Pixels
Break Continue: No
PCB Width: 6 mm
WS2815 84leds white addressable LED strip is individually addressable. Every 1 WS2815 IC controls 1 LED, and every LED can be shown any color you want. The ultra-slim 6mm width PCB is perfect for installations where space is limited; its unique zigzag bendable feature makes it an invaluable tool for sign makers, enabling intricate shapes and letters with ease. Each 3 LEDs could be cut, namely each 36mm could be cut, easy for a DIY job.
WS2815 DC12V 84 LEDs/m 10mm White LED Strip
Color: White
LED Qty: 84
Voltage: DC12V
Cutting Unit: 11.9 mm
Power: 12 W/m
Pixel Qty: 84 Pixels
Break Continue: Yes
PCB Width: 10mm
Built-in WS2815 IC 12V SMD5050 addressable white LED strip, each SMD5050 LED can be individually programmed and controlled, one meter has 60 LEDs on 10mm wide PCB board. The WS2815 IC can be regarded as the upgraded version of single signal WS2812. Dual-signal wires version, signal break-point continuous transmission. If one led is damaged, it will not affect the other LEDs working.
WS2815 DC12V 96 LEDs/m 10mm White LED Strip
Color: White
LED Qty: 96
Voltage: DC12V
Cutting Unit: 10.41 mm
Power: 13.8 W/m
Pixel Qty: 96 Pixels
Break Continue: Yes
PCB Width: 10mm
10mm PCB width, 96 white LEDs per meter, and one WS2815 IC controls one 5050SMD white LED, one LED one cut. This WS2815 RGB LED strip operates at a voltage of 12V, for the 5M WS2815 LED strip, there is no voltage drop even if all LEDs are turned on to full white light. You don’t need to inject power as frequently as the 5V WS2812 LED strip.
WS2815 DC12V 120 LEDs/m 5mm White 3pin LED Strip
Color: White
LED Qty: 120
Voltage: DC12V
Cutting Unit: 8.3 mm
Power: 17.3 W/m
Pixel Qty: 120 Pixels
Break Continue: Yes
PCB Width: 5mm
The WS2815 addressable LED light strip uses a DC12V power supply with a high safety factor. The light source uses imported chips, high brightness, low light decay, maintenance-free, energy saving, environmental protection, and long life. Therefore, more and more people choose LED light strips as decoration and lighting.
WS2815 DC12V 120 LEDs/m 5mm White 4pin LED Strip
Color: White
LED Qty: 120
Voltage: DC12V
Cutting Unit: 8.3 mm
Power: 17.3 W/m
Pixel Qty: 120 Pixels
Break Continue: Yes
PCB Width: 5mm
The 12V WS2815 LED strip is similar to the version of the 5V WS2813 LED strip and is designed with one data line and a spare data line. Signal transmission resumes at the breakpoint. If one of the LEDs is damaged, the following LEDs will still work. Each LED can be cut off at the cutting line.
WS2815 DC12V 120 LEDs/m 10mm White LED Strip
Color: White
LED Qty: 120
Voltage: DC12V
Cutting Unit: 16.6 mm
Power: 24 W/m
Pixel Qty: 120 Pixels
Break Continue: Yes
PCB Width: 10mm
There are 120 addressable white LEDs per meter, and 10mm wide PCB for 120LEDs/meter, DC5V input, and you can control each LED individually by WS2815 built-in IC. 120 LEDs per meter high-density design makes this pixel white led strip have a very uniform light performance. The PCB is designed with one data wire and one backup data wire if one LED lose work, others still work.
WS2815 DC12V 120 LEDs/m 10mm RGB LED Strip
Color: RGB
LED Qty: 120
Voltage: DC12V
Cutting Unit: 8.3 mm
Power: 24 W/m
Pixel Qty: 120 Pixels
Break Continue: Yes
PCB Width: 10mm
This strip runs on DC12V and has 120 LEDs per meter. Every single diode can display a different color, which enables stunning animations, text, and complex patterns. Customers choose this product for large-scale LED displays, stage lighting, immersive installations, and architectural mapping.
WS2815 DC12V 144 LEDs/m 8mm White LED Strip
Color: White
LED Qty: 144
Voltage: DC12V
Cutting Unit: 13.89 mm
Power: 20.6 W/m
Pixel Qty: 144 Pixels
Break Continue: Yes
PCB Width: 8mm
144leds strip in the market is usually 12mm width, we can supply 8mm 12V 144leds Individually controlled white LED strip, featuring independently addressable LEDs and signal breakpoint resume transmission. This white WS2815 high-density LED strip features 144 LEDs/m on an 8mm PCB width (typically 12mm). It meets the demands for high density and high brightness in extremely narrow spaces.
WS2815 DC12V 30 LEDs/m 10mm RGB LED Strip
Color: RGB
LED Qty: 30
Voltage: DC12V
Cutting Unit: 33.33 mm
Power: 4.3 W/m
Pixel Qty: 30 Pixels
Break Continue: Yes
PCB Width: 10 mm
This WS2815 strip is IP67 rated. It is allowed to be applied outdoors. 30leds/m makes it cost effective, but pixel quantity is 30 pieces per meter, enough for outdoor usage.This RGB LED strip combines flexibility, durability, and ease of use, making it an ideal choice for creating memorable and dynamic lighting displays in night clubs and entertainment venues.
WS2815 DC12V 60 LEDs/m 5mm RGB LED Strip
Color: RGB
LED Qty: 60
Voltage: DC12V
Cutting Unit: 16.67 mm
Power: 8.6 W/m
Pixel Qty: 60 Pixels
Break Continue: No
PCB Width: 5 mm
Built-in WS2815 chip 12V SMD3535 white LED strip, each 3535 LED can be individually programmed and controlled, one meter has 60 lights on a 5mm thin PCB board, sold in rolls of five meters (16.4 feet). Easily fits into tight spaces, providing a flexible installation option and presenting an even and intense lighting effect. This digital daylight LED strip features the 12V WS2815.
WS2815 DC12V 60 LEDs/m 8mm S RGB LED Strip
Color: RGB
LED Qty: 60
Voltage: DC12V
Cutting Unit: 50 mm
Power: 8 W/m
Pixel Qty: 60 Pixels
Break Continue: Yes
PCB Width: 8 mm
This DC12V individually addressable S-type LED strip is controlled by WS2815 IC to display RGB color chasing led light color, 60 LEDs per meter, 10mm PCB width. This S type LED strip is designed for sign makers to make vivid colorful channel letters, with bendable PCB it is easy to install inside the signage to make RGB visual impact.
WS2815 DC12V 60 LEDs/m 8mm RGB LED Strip
Color: RGB
LED Qty: 60
Voltage: DC12V
Cutting Unit: 16.67 mm
Power: 8.6 W/m
Pixel Qty: 60 Pixels
Break Continue: Yes
PCB Width: 8 mm
We offer this individually addressable RGB LED strip that controlled by build-in IC WS2815 (Upgraded WS2812B). This WS2815 RGB LED strip operates at a voltage of 12V, and one meter has 60 LEDs on 8mm wide PCB. Compared to the common WS2815 60 LEDs/m 10mm LED strip, the 8mm PCB width allows it to fit into narrower aluminum profiles.
WS2815 DC12V 60 LEDs/m 10mm RGB LED Strip
Color: RGB
LED Qty: 60
Voltage: DC12V
Cutting Unit: 16.67 mm
Power: 8.6 W/m
Pixel Qty: 60 Pixels
Break Continue: Yes
PCB Width: 10 mm
The 10mm 12V 60LEDs WS2815 Addressable LED Strip is a versatile and dynamic lighting product. Add a splash of color and creativity to any bar setting. Operating on a DC12V power supply, it features a signal break-continue function. Lighting remains uninterrupted and consistent, even if one LED is compromised.
WS2815 DC12V/24V66 LEDs/m 10mm RGB LED Strip
Color: RGB
LED Qty: 66
Voltage: DC12V/24V
Cutting Unit: 15.15 mm
Power: 13.2 W/m
Pixel Qty: 66 Pixels
Break Continue: Yes
PCB Width: 10 mm
High refresh rate, suitable for fast-response dynamic lighting.24V long-range design. 15m with no voltage drop. Wide compatibility: Supports multiple control platforms (such as Arduino, Raspberry Pi, ESP32, and ESP8266).
WS2815 DC12V/24V 66 LEDs/m 10mm RGB LED Strip
Color: RGB
LED Qty: 66
Voltage: DC12V/24V
Cutting Unit: 90.9 mm
Power: 22 W/m
Pixel Qty: 66 Pixels
Break Continue: No
PCB Width: 10 mm
This 24V WS2815 3535 RGB 66-LED addressable LED strip features a resume mechanism, allowing data transmission to resume where it left off upon power-up after a power outage or interruption.This helps prevent data loss during transmission and ensures the continuity and stability of the strip’s animation effects. Furthermore, the dense arrangement of 66 LEDs per meter enables richer, more detailed effects in decorative lighting applications.
WS2815 DC12V 84 LEDs/m 10mm RGB LED Strip
Color: RGB
LED Qty: 84
Voltage: DC12V
Cutting Unit: 35.7 mm
Power: 18 W/m
Pixel Qty: 84 Pixels
Break Continue: Yes
PCB Width: 10 mm
A new DC12V addressable WS2815 addressable RGB led strip type. It has a different LED density compared to the regular WS2815: 84 LEDs/m, and same width 10mm. If need uniform lighting, this is a good option. This LED strip has break-continue functionality, only if the circuit of the two consecutive LEDs is damaged will cause the lights behind them not to light up.
WS2815 DC12V 84 LEDs/m 6mm RGB S LED Strip
Color: RGB
LED Qty: 84
Voltage: DC12V
Cutting Unit: 35.7 mm
Power: 12 W/m
Pixel Qty: 84 Pixels
Break Continue: No
PCB Width: 6 mm
This S type LED strip is designed for sign makers to make vivid, colorful channel letters. With bendable PCB, it is easy to install inside the signage to make an RGB visual impact.Additionally, the strip is backed with 3M tape, ensuring a fixed installation on various surfaces. Ideal for dynamic lighting displays, architectural accents, and custom signage, this LED strip combines efficiency, versatility, and ease of use.
WS2815 DC12V 96 LEDs/m 10mm RGB LED Strip
Color: RGB
LED Qty: 96
Voltage: DC12V
Cutting Unit: 10.4 mm
Power: 13.8 W/m
Pixel Qty: 96 Pixels
Break Continue: Yes
PCB Width: 10 mm
96leds per meter WS2815 Addressable LED Strip Lights with pure color, 5050 RGB FPC board on the back of 3M glue, easy to install, low energy consumption, high brightness. The performance is stable and can do waterproof processing, unique line technology. Because of the dual signal transmission, the maintenance-free normal life of 50,000 hours or more and 5 years warranty.
WS2815 DC12V 120 LEDs/m 5mm RGB 3pin LED Strip
Color: RGB
LED Qty: 120
Voltage: DC12V
Cutting Unit: 16.67 mm
Power: 17.3 W/m
Pixel Qty: 120 Pixels
Break Continue: Yes
PCB Width: 5 mm
This WS2815 addressable LED strip light adopts an ultra-narrow 3.5*3.5mm LED chip with the driver IC integrated inside the SMD3535, saving a lot of space and achieving an ultra-narrow LED strip width of 5mm, High LED density achieves 120LED/m, you can easily achieve lighting the whole room, custom length and IP67 waterproof rating, indoor can be used for narrow space backlighting, outdoor can be used for ambient lighting.
WS2815 DC12V 120 LEDs/m 5mm RGB 4pin LED Strip
Color: RGB
LED Qty: 120
Voltage: DC12V
Cutting Unit: 8.3 mm
Power: 17.3 W/m
Pixel Qty: 120 Pixels
Break Continue: Yes
PCB Width: 5 mm
Upgrade your lighting experience with 12V WS2815 RGB LED strip, This WS2815 addressable LED strip light adopts an ultra-narrow 3.5*3.5mm LED chip with the driver IC integrated inside the SMD3535, easy to fit into many places where space is limited, achieving an ultra thin PCB width of 5mm and high LED density of 120LEDs/m. Higher brightness and more even light, perfect to be installed at narrow places and easy to be hidden.
WS2815 DC12V 120 LEDs/m 12mm RGB LED Strip
Color: RGB
LED Qty: 120
Voltage: DC12V
Cutting Unit: 16.6 mm
Power: 24 W/m
Pixel Qty: 120 Pixels
Break Continue: Yes
PCB Width: 12 mm
New individually addressable RGB LED strip design at DC12v and high density 120leds/m with 12mm PCB, and you can control each LED individually by WS2815 built-in IC. This LED strip has break-continue functionality, if one of the LEDs on the strip is damaged, the spare signal wire will continue to work properly, adding security to your addressable lighting project.
WS2815 DC12V 144 LEDs/m 12mm RGB LED Strip
Color: RGB
LED Qty: 144
Voltage: DC12V
Cutting Unit: 13.89 mm
Power: 20.6 W/m
Pixel Qty: 144 Pixels
Break Continue: Yes
PCB Width: 12 mm
The highest LED density addressable WS2815 RGB LED strip, with 144 SMD5050 LEDs per meter on 12mm wide PCB. DC 12V input and each RGB LED individually addressable. Dense LED arrangements can promise a more uniform illumination with a diffuser. Dual-signal wires version, signal break-point continuous transmission. If one led is damaged, it will not affect the other LEDs working.
WS2815 DC12V 144 LEDs/m 8mm RGB LED Strip
Color: RGB
LED Qty: 144
Voltage: DC12V
Cutting Unit: 13.89 mm
Power: 20.6 W/m
Pixel Qty: 144 Pixels
Break Continue: Yes
PCB Width: 8 mm
Our 8mm 12V WS2815 144leds Individually controlled RGB LED Strip with independently addressable LEDs and Signal Breakpoint Resume Transmission can be used for customization and dynamic RGB lighting effects.Each LED can be controlled, and each 2leds can be cut at 13.8mm. This SMD3535 WS2815 adopts the chip of an international leading manufacturer, brightness is high and the angle is wide, consistent color and stable performance.
WS2815 DC12V 72 LEDs/m 10mm RGBW LED Strip
Color: RGBW
LED Qty: 72
Voltage: DC12V
Cutting Unit: 13.89 mm
Power: 14.4 W/m
Pixel Qty: 72 Pixels
Break Continue: Yes
PCB Width: 10 mm
This individually addressable RGBW WS2815 LED strip has a 10mm thin PCB width. Built-in WS2815 intelligent IC (similar to WS2812), combined with SMD5050 high-quality LED chips. Dynamic dream color effects via the addressable SPI controller. DC12V version, safe voltage, no flash, lower power consumption, higher brightness, longer lifespan. IP20 rating for signage and channel letter lighting.
High Density 12V WS2815 RGBW Addressable LED Strip 144 LEDs/m Individually Controlled
Color: RGBW
LED Qty: 144
Voltage: DC12V
Cutting Unit: 13.89 mm
Power: 20.9 W/m
Pixel Qty: 144 Pixels
Break Continue: Yes
PCB Width: 10 mm
RGBW output adds a dedicated white channel for cleaner whites than RGB color mixing. Individually addressable control enables pixel animations, chases, gradients, and custom patterns.
SK6812 LED Strip
SK6812 DC12V 72 LEDs/m 10mm RGBW LED Strip
Color: RGBW
LED Qty: 72
Voltage: DC12V
Cutting Unit: 13.8 mm
Power: 22 W/m
Pixel Qty: 72 Pixels
Break Continue: No
PCB Width: 10mm
This programmable four-in-one RGB+white LED strip produces a mix of colored lights and precise, pure white light. White light color temperatures are available in 3000K, 4000K, and 6500K. This small addressable LED strip is suitable for holiday lighting and party decorations. For a wider range of white light color temperatures, consider the five-in-one RGBCCT digital light strip.
DMX
DC12V UCS512 RGBW LED Strip DMX512 Control for Architectural & Stage
Color: RGBW
LED Qty: 60
Voltage: DC12V
Cutting Unit: 50 mm
Power: 19.2 W/m
Pixel Qty: 20 Pixels
Break Continue: Yes
PCB Width: 10mm
This is a DMX512 RGBW digital LED strip, not a typical SPI pixel strip. It uses a parallel signal architecture instead of a daisy chain, so a single LED failure won’t take down the rest of the strip or the entire system.
DMX DC12V 60 LEDs/m 10mm White LED Strip
Color: White
LED Qty: 60
Voltage: DC12V
Cutting Unit: 50 mm
Power: 14.4 W/m
Pixel Qty: 20 Pixels
Break Continue: Yes
PCB Width: 10mm
5 meters DMX controlled led strip for sale. The DMX512 IC can support this each IC 3 channels. You can use dmx controller, ArtNet controller, a Madrix console, or a GPS signal to control the DMX lighting. It adapts 3in1 5050 white color LED as a light source, with high brightness and low power consumption. 60 LED lights per meter, a total of 300 lights per roll. Low voltage 12V DC input, you just need a 12V power supply to run this DMX LED tape.
DMX DC12V 180 LEDs/m 12mm CCT LED Strip
Color: CCT
LED Qty: 180
Voltage: DC12V
Cutting Unit: 50 mm
Power: 18 W/m
Pixel Qty: 20 Pixels
Break Continue: Yes
PCB Width: 12mm
The wider 12mm PCB improves heat dissipation, ensuring stable performance during long operating hours. The 50mm cutting intervals give precise control over length. With 20 pixels per meter, you can create zoned color temperature control and smooth transitions that enhance the visual experience.
DMX DC12V 60 LEDs/m 10mm CCT LED Strip
Color: CCT
LED Qty: 60
Voltage: DC12V
Cutting Unit: 50 mm
Power: 14.4 W/m
Pixel Qty: 20 Pixels
Break Continue: Yes
PCB Width: 10mm
There are 60 addressable CCT LEDs per meter, each LED has 3 colors namely 3 in 1 white LED chip combines warm white 2700k, natural white 4000k and cool white 6500k. 10mm wide PCB for 60LEDs/meter, DC12V input, and a single DMX512 IC controls 3LEDs, 20 pixels per meter in total. This LED strip has break-continue functionality, if one LED lose work, others still work.
DMX DC12V 60 LEDs/m 8mm RGB LED Strip
Color: RGB
LED Qty: 60
Voltage: DC12V
Cutting Unit: 33.3 mm
Power: 14.4 W/m
Pixel Qty: 30 Pixels
Break Continue: Yes
PCB Width: 8 mm
We offer a special DC12V addressable DMX512 LED strip with 60LEDs/m. Compared to the commonly available DMX 12V LED strip lights with 60 LEDs per meter and 20 pixels per meter on the market, it offers a higher pixel density of 30 pixels per meter. Each 2 LED of this DMX RGB LED strip is controlled by a 10-pin UCS512 DMX512 IC chip, so 2 LEDs are a pixel.
DMX DC12V 60 LEDs/m 10mm RGB LED Strip
Color: RGB
LED Qty: 60
Voltage: DC12V
Cutting Unit: 50 mm
Power: 14.4 W/m
Pixel Qty: 20 Pixels
Break Continue: Yes
PCB Width: 10 mm
5meters 60LEDs/m DMX512 RGB led strip lights for sale, with 12V+ GND A B P 5CH wires. The 12V DMX LED strip supports the operation mode of the first installation and then writing code, and any animation effects can be realized through the ArtNet DMX controller programming. There are 60 RGB lights per meter, one DMX512 IC controls 3 LED lights, 1 pixel = 3 LEDs, 50mm / 3 lights can be cut and 20 pixels per meter.
DMX DC12V 180 LEDs/m 12mm RGB LED Strip
Color: RGB
LED Qty: 180
Voltage: DC12V
Cutting Unit: 50 mm
Power: 18 W/m
Pixel Qty: 20 Pixels
Break Continue: Yes
PCB Width: 12 mm
5meters 60LEDs/m DMX512 RGB led strip lights for sale, with 12V+ GND A B P 5CH wires. The 12V DMX LED strip supports the operation mode of the first installation and then writing code, and any animation effects can be realized through the ArtNet DMX controller programming. There are 60 RGB lights per meter, one DMX512 IC controls 3 LED lights, 1 pixel = 3 LEDs, 50mm / 3 lights can be cut and 20 pixels per meter.