DC48V COB LED Strip
Product Feature
1. Long Distance Continuous Lighting
Light up to 20 meters with our 48V COB LED strip, which delivers perfectly even brightness with no dark spots. Built for massive installations that demand flawless, high end lighting.
2. Stable Brightness with Low Voltage Drop
Compared with 12V and 24V systems, the 48V design reduces voltage drop, which ensures consistent brightness from start to end in long installations.
3. Safe Low Voltage High Efficiency System
Although operating at 48V, it still belongs to the safe low voltage range, which improves power transmission efficiency while maintaining installation safety.
4. Reduced Installation Complexity
The number of required power injection points is smaller, which makes it easier to lay out the wiring for large projects and reduces the installation cost.
5. Consistent Performance for Large Projects
It works well for commercial and architectural lighting, which needs to be bright and stable over a wide area.
Learn more: What LED Driver Do I Need for LED Strip Lights?
Low vs High Voltage: How to Choose the Right LED Strip Light for Your Project
Wholesale DC48V COB LED Strip By Series
Voltage: DC48V. 0-100% dimmable.
LED density: 480 LEDs/m.
PCB width: 8mm.
DC48V COB LED Strip By Series
Light Up Your LED Project With LEDSuntech!
What is DC48V COB LED Strip?
A DC48V COB LED strip is a low-voltage, high-efficiency LED lighting strip that runs on 48V direct current. It uses COB (Chip on Board) technology, which means that LED chips are mounted directly on the PCB to make a surface that emits light all the time.
It can produce a continuous linear lighting effect without any dots or seams, and there are no LED components visible, which makes it highly suitable for architectural and decorative lighting.
48V can lower the current flow in the circuit, which helps keep the brightness stable and reduce voltage loss when sending signals over long distances.
The DC48V COB LED light strips have excellent performance and can operate continuously for a long time over a considerable distance. They are commonly used in commercial settings, corridors, and interior design projects.
Why choose 48V COB LED Strip?
1. Best for Long Distance Installation
48 volts enables continuous operation for a longer duration and over a greater distance, thereby reducing the need for frequent adjustments of power sources.
2. Stable Brightness Performance
Lower current operation reduces voltage drop, which keeps brightness consistent from start to end.
3. More Efficient Power Transmission
Higher voltage reduces current load, which improves energy efficiency and reduces cable heating.
4. Professional Grade Lighting Solution
With stable brightness and reduced voltage drop, it is specially designed for construction and commercial projects.
How to Connect Strip to Strip for COB?
(1)
Push strip through the gap
(2)
Make strip's edge reach inner wall of connector
(3)
Clamp both conductor for piercing PCB
(4)
Connection completed
48V vs 24V LED Strip
| Feature | 48V COB | 24V COB |
|---|---|---|
| Run Length | Longer | Medium |
| Voltage Drop | Lower | Higher |
| Wiring Complexity | Lower | Higher |
| Project Scale | Large | Small to medium |
Tips
- For 48V COB LED strips, it is important to correctly match the power supply with the load. To make sure that the performance is stable, the power capacity should be based on the total power and the length of the installation.
- The COB structure does help with heat dissipation, but it’s still best to use an aluminum frame for long-term stable operation.
- To avoid overload of a single power line, a reasonable power distribution plan needs to be designed for large lighting systems.
Q&A
What is the maximum continuous operating length of 48V COB LED strips?
When connected in series, a single 48V COB LED strip can usually run for 15 to 20 meters without losing much voltage or brightness.
Learn more about the circuit: The Complete Guide to Series and Parallel Circuits for LED Strip.
Do 48V LED strips need extra power to work?
Compared to traditional 12V or 24V systems, 48V LED strips require far fewer power injection points. This high efficiency simplifies the installation process and reduces wiring confusion.
Is 48V safer than high-voltage AC LED strips?
Yes, for sure. 48V is a safe low-voltage system (SELV), which means it is much safer to work with and set up than high-voltage AC LED strips. It doesn’t pose a risk of dangerous electric shock and can lower the risk of fire.
Can you adjust the brightness of 48V COB LED strips?
Yes, these strips have excellent dimming performance. They work perfectly with standard PWM dimmers and smart lighting controllers, which means you can change the brightness from 0% to 100% without any flickering.
DC48V COB LED strips Applications
- Commercial lighting
- Architectural lighting
- Interior and home lighting
- Hotel and entertainment venues
Certification System
LEDSuntech has more than 1000 kinds of LED light strips. We want our customers to feel confident that their LED strips are safe and manufactured to the highest quality. In order to ensure the best performance of our LED light strip products, all products have been tested by third-party authoritative laboratories and have obtained multiple quality certifications including ISO:9001, CE, RoHS, FCC, UL, ETL, etc.
