Individually Addressable LED Strip
Individually addressable LED strips are popular for dynamic lighting and flexible installation. Individually addressable LED strips allow each LED to be controlled individually to achieve complex effects and patterns. LEDSuntech offers a comprehensive range of LED strips to meet different application needs:
WS2812 LED strips operate at 5V, have single-point single control and built-in WS2812 IC. But it lacks breakpoint recovery function. LEDSuntech also offers 3.5mm ultra-thin SMD2020 200 LEDs/m products for space-constrained installations.
WS2813 LED strips have breakpoint recovery function. Operate at DC5V and contain built-in WS2813 IC. It is an upgraded version of WS2812 with higher reliability.
WS2815 LED strips use DC12V power supply, built-in WS2815 IC, and have breakpoint recovery function. WS2815 is superior to WS2813, which can reduce voltage drop and extend service life.
SK6812 LED strip is powered by 5V, built-in SK6812 IC and 3PIN connector, and supports multiple color options such as white light, CCT, RGB and RGBW. But it does not have breakpoint recovery function.
SK6813 LED strip is also powered by 5V, but has dual data signal and breakpoint recovery function. Data transmission speed is up to 800kpbs, which can achieve more complex lighting effects.
SK9822 LED strip maintains 5V power supply while providing higher brightness and stability, 4-wire protocol (+,-, clock, data), supporting single LED bead control and multi-LED bead linkage control, and can achieve a variety of lighting configurations.
APA102 LED strip is powered by 5V, built-in IC and dual signal lines (data and clock) for faster and more reliable data transmission. But it does not support breakpoint recovery.
The GS8208 LED strip is an enhanced version of the 5V WS2812B LED strip, featuring dual signal transmission and breakpoint recovery to improve performance and reliability in complex installations.
With these diverse options, LEDSuntech ensures that customers can find the perfect individually addressable LED strip for their specific lighting project.
Below is a comparison table of the Individually Addressable LED Strips provided by LEDSuntech, highlighting their key features:
Voltage — Working voltage required for each LED strip.
Internal IC — Integrated circuit built into the LED strip, essential for control and functionality.
Single Point Single Control — Whether the LED strip can be controlled from a single point.
Breakpoint Resume —The LED strip can resume operation from a breakpoint in case of a failure or interruption.
Signal Type —The LED strip uses a single or dual signal for data transmission, which affects the control flexibility and reliability.
Category
WS2812 LED Strip
WS2812 DC5V 60 LEDs/m 10mm RGB LED Strip
Color: RGB
LED Qty: 60
Voltage: DC5V
Cutting Unit: 16.6 mm
Power: 18 W/m
Pixel Qty: 60 Pixels
Break Continue: No
PCB Width: 10 mm
SPI WS2812 low-voltage 5V individually controlled addressable RGB LED strip, with 60 ICs per meter, each IC controls 1 LED RGB light.The feature of individual control makes programming richer and more controllable. 60LEDs per meter means 300LEDs per roll. One LED equals 16.6mm and can be cut, making the connection more flexible. K1000C controller and K8000C controller can be used to realize regional lighting design, such as lighting performances, courtyard decoration, atmosphere enhancement, etc.
WS2812 DC5V 60 LEDs/m 6mm S RGB LED Strip
Color: RGB
LED Qty: 60
Voltage: DC5V
Cutting Unit: 50 mm
Power: 12 W/m
Pixel Qty: 60 Pixels
Break Continue: No
PCB Width: 6 mm
60leds per meter LED strips are the most popular one, and the appropriate led bead density is one of the reasons. The 6mm width allows you to move in small spaces, and its unique Z-shape allows illuminated letters and logos to no longer have corner dark areas. This feature also allows the LED strip to be easily installed along irregular surfaces. The back of the led strip has 3M LSE double-sided tape, making installation easier.
WS2812C DC5V 200 LEDs/m 3.5mm RGB LED Strip
Color: RGB
LED Qty: 200
Voltage: DC5V
Cutting Unit: 25 mm
Power: 40 W/m
Pixel Qty: 200 Pixels
Break Continue: No
PCB Width: 3.5 mm
3.5mm 200leds/m high-density LED strips are specially designed for small spaces. The ultra-thin LED strip size 3.5mm with a sleek black PCB and the design that each led bead can be individually controlled allow for diverse lighting options.25mm unit cut, set of 5led beads, 40W/m Flexible advanced LED strip not only ensures brightness, but also makes it the perfect choice for those lighting solutions that require efficiency and complexity.
WS2812 DC5V 350 LEDs/m 10mm RGB LED Strip
Color: RGB
LED Qty: 350
Voltage: DC5V
Cutting Unit: 2.85 mm
Power: 22 W/m
Pixel Qty: 350 Pixels
Break Continue: No
PCB Width: 10 mm
With 350 LEDs per meter and 1,750 LEDs per roll, the high-density LED strips provide dotless lighting and uniform lighting while immersing people in a comfortable environment.5V low voltage power supply is safer in use.The flexibility of these LED strips also allows them to be bent and shaped at will to follow curves and contours, making them ideal for entertainment venues, stage decorations, and architectural lighting.
WS2812 DC5V 148 LEDs/m 8mm RGB LED Strip
Color: RGB
LED Qty: 148
Voltage: DC5V
Cutting Unit: 13.5 mm
Power: 20 W/m
Pixel Qty: 148 Pixels
Break Continue: No
PCB Width: 8 mm
This DC5V individually addressable LED strip, each LED can be individually programmed and controlled, one meter has 148 lights on 8mm thin PCB board. This product was designed by ourselves, not available on the market.
WS2812 DC5V 64 LEDs/m 10mm RGB LED Strip
Color: RGB
LED Qty: 64
Voltage: DC5V
Cutting Unit: 15.63mm
Power: 12 W/m
Pixel Qty: 64 Pixels
Break Continue: No
PCB Width: 10 mm
It is addressable. This means you can control each LED individually and it has 64 WS2812 IC LEDs built in per meter. This control capability allows you to adjust the brightness and color of each LED very precisely. It features programmable 5V DC constant voltage control for excellent color uniformity across all pixels and high brightness.
WS2812 DC5V 96 LEDs/m 10mm RGB LED Strip
Color: RGB
LED Qty: 96
Voltage: DC5V
Cutting Unit: 20.83mm
Power: 17.3 W/m
Pixel Qty: 96 Pixels
Break Continue: No
PCB Width: 10 mm
This product has been designed for low driving voltage low power consumption and low lumen depreciation. It ensures longer life and provides a green and high-intensity light. Available in retail reels from 0.5m to 5m. We offer a self-adhesive backing on our non-waterproof models and premium silicone-jacketed IP67/IP68 waterproof models with heavy-duty mounting brackets.
WS2812 DC5V 144 LEDs/m 10mm RGB LED Strip
Color: RGB
LED Qty: 144
Voltage: DC5V
Cutting Unit: 6.94 mm
Power: 26 W/m
Pixel Qty: 144 Pixels
Break Continue: No
PCB Width: 10 mm
A built-in signal reshaping and amplification drive circuit is integrated inside the chip. Its unique auto-reshaping transfer technology ensures that the number of cascaded pixels is never limited by signal decay. This number only depends on the data transmission speed. This high-density LED strip boasts low driving voltage low power consumption and minimal lumen depreciation. It achieves eco-friendly high-brightness output.
WS2813 LED Strip
WS2813 DC5V 60 LEDs/m 10mm RGB LED Strip
Color: RGB
LED Qty: 60
Voltage: DC5V
Cutting Unit: 16.6 mm
Power: 18 W/m
Pixel Qty: 60 Pixels
Break Continue: Yes
PCB Width: 10 mm
WS2813 RGB addressable LED strip has a break continue function. It is better than WS2812 with only one signal line. This LED strip has dual signals, making its signal transmission better. Operate at DC5V and contain built-in WS2813 IC. It is an upgraded version of WS2812 with higher reliability.The WS2813 LED strips are suitable for a wide range of applications, including home lighting, commercial lighting, entertainment lighting, and automotive lighting.
WS2813 DC5V 64 LEDs/m 10mm RGB LED Strip
Color: RGB
LED Qty: 64
Voltage: DC5V
Cutting Unit: 15.62 mm
Power: 12 W/m
Pixel Qty: 64 Pixels
Break Continue: Yes
PCB Width: 10 mm
This DC5V WS2813 LED RGB strip has a breakpoint resume function, uses dual signal transmission, and has high stability. The WS2813 addressable LED strip is used with a controller and is very suitable for programmable DIY lighting projects.This 64leds/m 10mm wide WS2813 LED strip product uses chips from leading international manufacturers.
WS2813 DC5V 144 LEDs/m 10mm RGB LED Strip
Color: RGB
LED Qty: 144
Voltage: DC5V
Cutting Unit: 6.9 mm
Power: 43 W/m
Pixel Qty: 144 Pixels
Break Continue: Yes
PCB Width: 12 mm
This WS2813 144LEDs/m RGB led strip comes with a 4-pin JST SM connector on each end. Every LED segment can be cut at 6.9mm.The 12mm wide PCB can accommodate SMD 5050 lamp beads and has a wider light-emitting area.WS2813 is individually addressable. Every 1 WS2813 IC control 1 LED, every LED can be shown any color you want. By varying the level of red, green, and blue (RGB) per LED, many color combinations can be made.
WS2815 LED Strip
High Density 12V WS2815 RGBW Addressable LED Strip 144 LEDs/m Individually Controlled
Color: RGBW
LED Qty: 144
Voltage: DC12V
Cutting Unit: 13.89 mm
Power: 20.7 W/m
Pixel Qty: 144 Pixels
Break Continue: Yes
PCB Width: 10 mm
12V WS2815 reduces current compared to 5V strips, helping with more stable brightness and easier power planning. 144 LEDs/m high density creates a smoother, more continuous light line with less visible “dotting,” especially under diffusers.
WS2815 DC12V 60 LEDs/m 8mm RGB LED Strip
Color: RGB
LED Qty: 60
Voltage: DC12V
Cutting Unit: 16.67 mm
Power: 8.6 W/m
Pixel Qty: 60 Pixels
Break Continue: Yes
PCB Width: 8 mm
The 8mm thin PCB width individually addressable RGB LED strip uses built-in WS2815 smart IC, combined with SMD5050 high-quality LED chip, to present rich static and dynamic dreamy color effects through the addressable SPI controller.The use of Bluetooth music controller SP107 can make the WS2815 RGB lights dance with the music. The colorful and eye-catching lights can be well used in KTV, nightclubs and other entertainment venues.
10mm 60leds DC12V 60 Pixels WS2815 Addressable White LED Strip
Color: White
LED Qty: 60
Voltage: DC12V
Cutting Unit: 16.67 mm
Power: 8.6W/m
Pixel Qty: 60 Pixels
Break Continue: Yes
PCB Width: 10mm
Our WS2815 white SPI LED strips offer breakpoint resume functionality. The LED strip maintains brightness even if one LED fails. Dual signal backup enables stable communication even in challenging installation environments.
WS2815 12V Digital LED Strip
Color: RGB
LED Qty: 60
Voltage: DC12V
Cutting Unit: 16.67 mm
Power: 18W/m
Pixel Qty: 60 Pixels
Break Continue: Yes
PCB Width: 10mm
The WS2815 12V digital LED strip is a flexible lighting solution for a variety of applications and is simple to install, with 3M tape on the back of the PCB, just peel off and install. It can also be cut to fit any length or form, 30led is 33.3mm each cut. 60leds is 16.6mm each cut, 144leds is 6.9mm each cut.
12V 24V 66leds Individually Controlled White LED Strip
Color: White
LED Qty: 66
Voltage: DC12V/24V
Cutting Unit: 90.9mm
Power: 22 W/m
Pixel Qty: 66 Pixels
Break Continue: Yes
PCB Width: 10mm
he 10mm 66LEDs DC12V/DC24V Strip is 66 pixels per meter. With cutting-edge technology—its versatile voltage range—It is capable of operating on DC12V, DC24V, and up to DC30V. Equipped with addressable RGB WS2815 LEDs sized at 3.5×3.5mm using the SMD3535 package, this strip offers superior lighting precision and color options.
Addressable Zigzag White LED Strip 84leds
Color: White
LED Qty: 84
Voltage: DC12V
Cutting Unit: 35.7mm
Power: 18 W/m
Pixel Qty: 84 Pixels
Break Continue: No
PCB Width: 6mm
WS2815 84leds white addressable LED strip is individually addressable. Every 1 WS2815 IC controls 1 LED, and every LED can be shown any color you want. The ultra-slim 6mm width PCB is perfect for installations where space is limited; its unique zigzag bendable feature makes it an invaluable tool for sign makers, enabling intricate shapes and letters with ease. Each 3 LEDs could be cut, namely each 36mm could be cut, easy for a DIY job.
Addressable Zigzag RGB LED Strip 84leds
Color: RGB
LED Qty: 84
Voltage: DC12V
Cutting Unit: 35.7mm
Power: 18 W/m
Pixel Qty: 84 Pixels
Break Continue: No
PCB Width: 6mm
This S type LED strip is designed for sign makers to make vivid, colorful channel letters. With bendable PCB, it is easy to install inside the signage to make an RGB visual impact.Additionally, the strip is backed with 3M tape, ensuring a fixed installation on various surfaces. Ideal for dynamic lighting displays, architectural accents, and custom signage, this LED strip combines efficiency, versatility, and ease of use
WS2815 DC12V 84 LEDs/m 10mm RGB LED Strip
Color: RGB
LED Qty: 84
Voltage: DC12V
Cutting Unit: 35.7 mm
Power: 18 W/m
Pixel Qty: 84 Pixels
Break Continue: Yes
PCB Width: 10 mm
WS2815 LED strip powered by a DC12v source, it has a more stable performance due to its dual-channel data transmission. it incorporates a signal backup function to ensure uninterrupted lighting effects even if one LED fails.Double-sided FPCB: Use an S-shaped PCB, which can be bent arbitrarily, not easily broken, and illuminates irregular spaces. With the capability to be cut every LED, or at 11.9mm intervals. it allows for customization to fit specific project requirements.
WS2815 DC12V 96 LEDs/m 10mm White LED Strip
Color: White
LED Qty: 96
Voltage: DC12V
Cutting Unit: 10.41 mm
Power: 13.8 W/m
Pixel Qty: 96 Pixels
Break Continue: Yes
PCB Width: 10mm
Different from the regular WS2815 30leds/m and 60leds/m addressable LED strips on the market, our self-developed high-density and break continue 96leds/m addressable LED strips are more popular.Due to its 96leds/m density of LED beads and 13.8W low power consumption, 96leds/m is more suitable for use in small neon tubes, avoiding the problems of light spots and excessive temperature.96 leds per meter is quite good for even dynamic lighting such as stage design, concerts, and theaters to create dynamic backdrops and effects.
96leds RGB Addressable LED Strip WS2815
Color: RGB
LED Qty: 96
Voltage: DC12V
Cutting Unit: 10.4 mm
Power: 19.2 W/m
Pixel Qty: 96 Pixels
Break Continue: Yes
PCB Width: 10 mm
96leds per meter WS2815 Addressable LED Strip Lights with pure color, 5050 RGB FPC board on the back of 3M glue, easy to install, low energy consumption, high brightness. The performance is stable and can do waterproof processing, unique line technology. Because of the dual signal transmission, the maintenance-free normal life of 50,000 hours or more and 5 years warranty.
5mm 120leds DC12V 120 Pixels WS2815 Addressable White LED Strip
Color: White
LED Qty: 120
Voltage: DC12V
Cutting Unit: 25 mm
Power: 17.3 W/m
Pixel Qty: 120 Pixels
Break Continue: Yes
PCB Width: 5 mm
The 12V WS2815 LED strip is similar to the version of the 5V WS2813 LED strip and is designed with one data line and a spare data line. Signal transmission resumes at the breakpoint. If one of the LEDs is damaged, the following LEDs will still work. Each LED can be cut off at the cutting line.There are 4-pin JST SM connectors and separate power/ground wires on both ends, making it easy to connect and power.
5mm Addressable LED Strip WS2815
Color: RGB
LED Qty: 120
Voltage: DC12V
Cutting Unit: 8.3 mm
Power: 24 W/m
Pixel Qty: 120 Pixels
Break Continue: No
PCB Width: 5 mm
Each light bead forms a loop that can be cut to any length without damaging other convenient fixing and locking components. This flexible cutting process allows for a simple structure, ultra-thin design, low-temperature light source, and flexible material selection. It also offers energy-saving and environmentally friendly installation, lower heat generation, higher brightness, and a cleaner, more energy-efficient, and more aesthetically pleasing appearance.
120leds White Addressable LED Strip WS2815
Color: White
LED Qty: 120
Voltage: DC12V
Cutting Unit: 16.6 mm
Power: 24 W/m
Pixel Qty: 120 Pixels
Break Continue: Yes
PCB Width: 10 mm
This WS2815 120LEDs/m white pixel LED strip comes with a 4-pin JST SM connector on each end. Every LED segment can be cut into 2 LEDs, namely 16.7mm. You can also connect multiple WS2815 strips to make them longer. To power this WS2815 strip, you need a 12V power supply.
8mm 12V 144leds Individually Controlled White LED Strip
Color: White
LED Qty: 144
Voltage: DC12V
Cutting Unit: 13.89 mm
Power: 20.6 W/m
Pixel Qty: 144 Pixels
Break Continue: Yes
PCB Width: 8 mm
144leds strip in the market is usually 12mm width, we can supply 8mm 12V 144leds Individually controlled white LED strip, featuring independently addressable LEDs and signal breakpoint resume transmission. This white WS2815 high-density LED strip features 144 LEDs/m on an 8mm PCB width (typically 12mm). It meets the demands for high density and high brightness in extremely narrow spaces.
WS2815 DC12V 144 LEDs/m 12mm RGB LED Strip
Color: RGB
LED Qty: 144
Voltage: DC12V
Cutting Unit: 13.89 mm
Power: 20.6 W/m
Pixel Qty: 144 Pixels
Break Continue: Yes
PCB Width: 12 mm
For projects that require smooth animation effects and delicate images, WS2815 RGB 144leds/m is the best choice. High-density LED beads make the light even and sharp-free, and independently controllable ICs provide diversified programming options. Every 2 leds are a cutting unit. The mini cutting unit is very friendly for special length and customized projects, and can be cut according to actual needs.
SK6812 LED Strip
SK6812 DC5V 60 LEDs/m 8mm White LED Strip
Color: White
LED Qty: 60
Voltage: DC5V
Cutting Unit: 16.6 mm
Power: 14.4 W/m
Pixel Qty: 60 Pixels
Break Continue: No
PCB Width: 8mm
SK6812 white addressable LED strip supports 5V low voltage input and 16.6mm cutting unit, allowing each LED to be cut individually. By matching a simple controller or K1000C, K8000C LED controller, you can realize a magical lighting journey. The white light is no longer monotonous. It beats at different frequencies, making people immersed in a smart rather than soft atmosphere.
SK6812 WWA LED Strip
Color: WWA
LED Qty: 60
Voltage: DC5V
Cutting Unit: 16.6 mm
Power:14.4 W/m
Pixel Qty: 60 Pixels
Break Continue: No
PCB Width: 10 mm
The SK6812 WWA LED strip display color temperatures from 1800K, very dim amber light, to warm light to 6500K cool daylight light. Each 5050 WWA (Warm white +White + Amber) LED is controlled independently, so it can have its own color temperature and brightness.
SK6812 DC5V 60 LEDs/m 10mm RGB LED Strip
Color: RGB
LED Qty: 60
Voltage: DC5V
Cutting Unit: 16.6 mm
Power: 18 W/m
Pixel Qty: 60 Pixels
Break Continue: No
PCB Width: 10 mm
The SK6812 5V LED strip is Individually addressable LED strip, every led bead is controlled by a separate IC. With RGB LED beads, It can emit light of many colors. Because of its bright colors, it is often used for stage lighting decoration and holiday shopping mall decoration. In addition to the commonly used IP20 light strips, I can produce higher waterproof levels according to customer needs, such as IP65, IP66, IP67 and IP68.
SK6812 DC5V 60 LEDs/m 5mm RGBW LED Strip
Color: RGBW
LED Qty: 60
Voltage: DC5V
Cutting Unit: 16.67 mm
Power: 14.4 W/m
Pixel Qty: 60 Pixels
Break Continue: No
PCB Width: 5 mm
5mm width LED strip, 60leds/m, 14.4W per meter. The ultra-thin light strip width design not only ensures quality, but also brings convenience to projects that need to install lighting in small spaces. Under the control of the controller, it can not only emit light in four colors: red, green, blue, and white, but it can also superimpose and mix the four primary colors at will to create more unexpected surprises.
SK6812 DC5V 60 LEDs/m 10mm RGBW LED Strip
Color: RGBW
LED Qty: 60
Voltage: DC5V
Cutting Unit: 16.67 mm
Power: 14.4 W/m
Pixel Qty: 60 Pixels
Break Continue: No
PCB Width: 10 mm
It uses SK6812 IC (Integrated Circuit) as its driver. SK6812 RGBW LED strip lights can usually be controlled by pixel controllers (such as K1000C, K8000C) to produce a wide range of colors. This LED strip can also be cut to specific lengths and reattached as needed.The SK6812 LED strip can be powered by a compatible power supply with appropriate voltage (5V). Low-voltage power supply is also safer in use.
10mm 66leds DC12V DC24V 66 Pixels SK6812 Individually Digital RGBW LED Strip
Color: RGBW
LED Qty: 66
Voltage: DC12/24V
Cutting Unit: 166.67 mm
Power: 21 W/m
Pixel Qty: 66 Pixels
Break Continue: No
PCB Width: 10 mm
Normal RGBW LED strip individually addressable is SK6812, operates at DC5v, now we launch this one LED individually controlled RGBW strip that is DC12v to DC24v, at most DC30v input. For RGBW, the White colors, warm white, natural white, and cool white are all available.
144 SK6812 RGBW LED Strip 8mm
Color: RGBW
LED Qty: 144
Voltage: DC5V
Cutting Unit: 6.9 mm
Power: 43.2 W/m
Pixel Qty: 144 Pixels
Break Continue: No
PCB Width: 8 mm
The programmable SK6812 RGBW LED strip has a density of 60 LEDs per meter. For users requiring higher light density, a high-density version with 120 LEDs/144 LEDs per meter is also available.The mini SMD3535 LED strip is thin and flexible. The RGBW LED pixel strip is only 5mm wide. Easily adapt to complex installations.
SK6812 RGBW 144leds LED Strip 12mm
Color: RGBW
LED Qty: 144
Voltage: DC5V
Cutting Unit: 6.9 mm
Power: 43 W/m
Pixel Qty: 144 Pixels
Break Continue: No
PCB Width: 12 mm
This DC5V individually addressable LED strip, controlled by the SK6812 IC, displays RGBW color-chasing LED lights.It features 144 LEDs per meter, giving a total of 720 pixels in a 5-meter strip. Each LED is individually addressable. You can set it to a different color and brightness.
SK6812 DC24V 72 LEDs/m 12mm RGBW LED Strip
Color: RGBW
LED Qty: 72
Voltage: DC12V
Cutting Unit: 13.8 mm
Power: 22 W/m
Pixel Qty: 72 Pixels
Break Continue: No
PCB Width: 10 mm
A programmable 4-in-1 RGB+white strip that mixes color and delivers clean white light (3000K/4000K/6500K). Compact and addressable—great for holidays and parties. Need more white flexibility? Upgrade to the 5-in-1 RGBCCT strip.
SK6813 LED Strip
SK6813 DC5V 60 LEDs/m 10mm RGB LED Strip
Color: RGB
LED Qty: 60
Voltage: DC5V
Cutting Unit: 16.6 mm
Power: 18 W/m
Pixel Qty: 60 Pixels
Break Continue: Yes
PCB Width: 10 mm
SK6813 pixel protocol is designed by China Osco, SK6813 RGB LED strip is a 3-channel LED strip, which allows to control red, green, blue LEDs. Precisely control each group of LEDs to present different animation effects. It is also powered by 5V, but it is different from the SK6812. SK6813 has dual data signal and break continue function. Data transmission speed is up to 800kpbs, which can achieve more complex lighting effects.
SK9822 LED Strip
SK9822 DC5V 60LEDs/m 10mm RGB LED Strip
Color: RGB
LED Qty: 60
Voltage: DC5V
Cutting Unit: 16.6 mm
Power: 18 W/m
Pixel Qty: 60 Pixels
Break Continue: Yes
PCB Width: 10 mm
SK9822 uses top SMD internal integrated high quality external control line serial cascade constant current IC, the SK9822 LED strip is individually controlled LED strip With a high refresh rate at 30MHz and low latency, data transmission speed can reach 800Kbps and the PWM control terminal can realize 256 adjustment levels. The SK9822 delivers smooth and seamless color transitions, ensuring a truly immersive and engaging lighting experience.
APA102 LED Strip
APA102 DC5V 60 LEDs/m 10mm RGB LED Strip
Color: RGB
LED Qty: 60
Voltage: DC5V
Cutting Unit: 16.6 mm
Power: 14.4 W/m
Pixel Qty: 60 Pixels
Break Continue: No
PCB Width: 10 mm
The APA102 RGB addressable led strip with SPI protocol does not require cumbersome address writing steps. You can power on and use it after you get the product. Free cutting length can flexibly adjust the length of the LED strip without damaging the circuit. The density of 60leds/m has the widest range of applications. It is a good choice whether it is TV background wall decoration or furniture cabinet bottom lighting.
APA102 DC5V 144 LEDs/m 12mm RGB LED Strip
Color: RGB
LED Qty: 144
Voltage: DC5V
Cutting Unit: 6.9 mm
Power: 43 W/m
Pixel Qty: 144 Pixels
Break Continue: No
PCB Width: 12 mm
There are 144 Addressable RGB LEDs per meter and 12mm wide, DC5V input, and you can control each LED individually! Yes, that’s right, this is the digitally-addressable type of LED strip. You can set the color of each LED’s red, green and blue component with 8-bit PWM precision (so 24-bit color per pixel).In addition, the unique density of 144 lights can match neon lights of any height without causing light spots.
APA102 DC5V 200LEDs/m 3.5mm RGB LED Strip
Color: RGB
LED Qty: 200
Voltage: DC5V
Cutting Unit: 5 mm
Power: 43 W/m
Pixel Qty: 200 Pixels
Break Continue: No
PCB Width: 3.5 mm
There are very few high-density light strips with 200 leds/m on the market. Our light strips are developed on the premise of ensuring high density and 3.5mm ultra-thin light strips. The 5mm cutting unit gives you no worries. If a single lamp bead is damaged, just cut it off. Ultra-thin and flexible LED light strips are the best choice for light box lighting, interesting letters, or furniture decoration.
GS8208 LED Strip
GS8208 DC12V 60 LEDs/m 10mm CCT LED Strip
Color: CCT
LED Qty: 60
Voltage: DC12V
Cutting Unit: 16.6 mm
Power: 14.4 W/m
Pixel Qty: 60 Pixels
Break Continue: Yes
PCB Width: 10 mm
CCT three-in-one LED beads combine three kinds of white light with different color temperatures. Compared with traditional led beads, it not only saves space but also makes the integration between light and light smoother. Under the control of an external IC, each led bead can light up different colors at the same time. Soft yet special, any combination of light beams brings a different experience to your bedroom, commercial lighting, and cinema.
GS8208 DC12V 60 LEDs/m 10mm RGB LED Strip
Color: RGB
LED Qty: 60
Voltage: DC12V
Cutting Unit: 16.6 mm
Power: 14.4 W/m
Pixel Qty: 60 Pixels
Break Continue: Yes
PCB Width: 10mm
The advantage of an external IC is that it helps dissipate heat. GS8208 is an addressable RGB LED strip with an external IC. The individually controlled design allows each LED lamp bead to correspond to an IC. The GS8208 integrated circuit supports dual signal line versions and signal break continuous transmission. If one LED is damaged, the operation of other LEDs will not be affected.
Addressable UV LED Strip Individually Controlled
Color: RUV
LED Qty: 60
Voltage: DC12V
Cutting Unit: 16.6 mm
Power: 14.4 W/m
Pixel Qty: 60 Pixels
Break Continue: Yes
PCB Width: 10mm
UV DC12v individually controlled external IC, but a stable function, then this strip is your good choice. 60 pixels/m and 60leds/m, each LED is individually controlled. GS8208 IC supports dual signal line versions and continuous transmission. If an LED is damaged, the work of the other LEDs will not be affected. It is equipped with a 4-pin JST-SM connector with two separate power/ground terminals.
GS8208 DC12V 50 LEDs/m 12mm RGB LED Strip
Color: RGB
LED Qty: 50
Voltage: DC12V
Cutting Unit: 20 mm
Power: 12 W/m
Pixel Qty: 50 Pixels
Break Continue: Yes
PCB Width: 12mm
GS8208 with DC12V, individually controlled addressable, it is single LED cuttable, external IC and RGB optional. In addition, it also has dual signal function. Dual signal IC working mechanism is roughly the same as single signal addressable LED strip light, but breakpoint resume addressable LED strip light has a higher PWM refresh frequency, a more realistic display effect, and less stroboscopic phenomenon.
GS8208 DC24V 60 LEDs/m 10mm RGB LED Strip
Color: RGB
LED Qty: 60
Voltage: DC24V
Cutting Unit: 16.6 mm
Power: 20 W/m
Pixel Qty: 60 Pixels
Break Continue: Yes
PCB Width: 10mm
Powered by internationally sourced leading chips, the GS8028 IC offers high output, broad coverage, excellent color consistency, and reliable operation.It also supports dual‑signal operation. While the basic principle mirrors single‑signal addressable strips, the dual‑signal version achieves a higher PWM frequency, truer visuals, and much less strobing.