60leds 12V UVC LED Strip Product Description
(1) 60 pcs UVC LED chip Per meter
(2) Good stability, CE & RoHS approved
(3) Flexible PCB 3oz thickness
(4) Genuine 3M tape or good heat dissipation function blue tape
(5) DC12v input, safe installation
We also offer UVC strip light with quartz lens, which emits more UVC dosage ( 1522μw/cm⊃2;)than UVC strip light without lens does(758μw/cm⊃2;). The test data for UVC 60leds 12v strip light with quartz lens is as below:
60 LEDs with quartz lens:
| UVC-LED Module Parameters | |||
| Item | Value | Unit | |
| UVC LED | Irradiation | 300 | mW |
| Beam angle | 60 | ° | |
| Parameters | Irradiation distance | 10 | cm |
| Irradiation area diameter | 11.55 | cm | |
| Optical power density | 245.15 | μW/cm2 | |
60 LEDs without quartz lens:
| UVC-LED Module Parameters | |||
| Item | Value | Unit | |
| UVC LED | Irradiation | 300 | mW |
| Beam angle | 120 | ° | |
| Parameters | Irradiation distance | 10 | cm |
| Irradiation area diameter | 34.64 | cm | |
| Optical power density | 67.11 | μW/cm2 | |
Attention
1. Pay special attention: UV lamps, please do not look directly at the light source with the
naked eye! Test please wear special goggles!
2. Please read the product instructions carefully before the product is installed and used.
3. The power output must be DC7V ~ DC13V.
4. The product is lightly put, to avoid damage to the product, please hand it over to
professionals to install and repair, maintenance.
5. Please understand the label tips on the lamp packaging when wiring.
6. When wiring must cut off the external power supply, to prevent people from touching or
damage the lamp, the product must be installed after the installation before powering.
7. When using external power cords outdoors, it is necessary to take measures to
waterproof and leak water.
8. It is forbidden to press the surface of the LED.
9. The use of any acidic or alkaline adhesive type of glue is prohibited from contact with
this product.
60leds 12V UVC LED Strip Product Parameter
Specification:
Item No.: STSN-60UVC3535
Light Source: UVC LED chip
Input Voltage: DC7v ~ DC13v
Power Consumption: 32W/m
Wavelength: 265~278nm
Dimensions: 1000mm*25mm
Beam angle: 120 degrees
Optional product parameters:
| Model | Wavelength | LED Qty pcs/meter |
Power Consumption W/M |
Voltage V/DC |
PCB Size mm |
|---|---|---|---|---|---|
| STSN-60UV2835 | 360~365nm 395~400nm |
60 | ≤5W | 12V/24V | Double Copper PCB 5000*10mm |
| STSN-120UV2835 | 360~365nm 395~400nm |
120 | ≤10W | 12V/24V | Double Copper PCB 5000*10mm |
| STSN-240UV2835 | 360~365nm 395~400nm |
240 | ≤20W | 12V/24V | Double Copper PCB 5000*10mm |
| STSN-30UV3535 | 305~315nm | 30 | ≤10W | 12V/24V | Double Copper PCB 5000*12mm |
| STSN-60UV3535 | 305~315nm | 60 | ≤14.4W | 12V/24V | Double Copper PCB 5000*12mm |
| STSN-60UV5050 | 360~365nm 395~400nm |
60 | ≤14.4W | 12V/24V | Double Copper PCB 5000*10mm |
| STSN-30UVC3535 | 265-278nm | 30 | 25W/m | 24V | 3oz PCB 1000*20mm |
| STSN-30UVC3939 | 265-278nm | 30 | 25W/m | 24V | 3oz PCB 1000*20mm |